fender roller to borrow

[TurboE30ftw]

Turns out my rear tires rub when boost hits and the back squats :lol:


I am wondering if anyone has a better alternative such as a fender roller...because otherwise its a heat gun to my fender with a bat between my tire and fender to see if I can get some clearance that way

[devlish]

cut the inner lip off.

[TurboE30ftw]

the inner lip is already flattened against the fender.. id still like to roll the fenders a little still

[BadAss88GT]

You can use a baseball bat for it, works really well.

Otherwise...

http://www.rollyourfender.com/

[EVILUTION]

He's talking about having his fenders pulled not rolled. Rolling is for the lip and pulling is beyond that.

[BadAss88GT]

He said rolled, thats why I posted that.

[EVILUTION]

In true WIR fashion you should get some spring spacers so the back doesn't squat soo much! LOL.

I wouldn't risk pulling the panel. I'd fix the suspension.

[BadAss88GT]

In true WIR fashion you should get some spring spacers so the back doesn't squat soo much! LOL.

I wouldn't risk pulling the panel. I'd fix the suspension.

LOL, are you talking about the little black rubber spacers for coil springs, or shackles for leaf springs?

I think either way he'd have to get a chrome differential cover and possibly some red lights to mount on the bottom.

[TurboE30ftw]

I run the stock spring pads still, and there will be no ghetto rigs here. They are fresh springs and shocks, I am just running way wider wheels with a slightly different offset than stock :shock:

I have rolled the lip but even with the lip rolled it barely rubs on the top outside of the tire and only in a gear lower than 3rd usually.

Subframe bushings are a little tired and fixing them would probably give me the extra half inch that I need and tighten things up. (Those are being done this winter.)

I might still just cut that inner lip off like devlish suggested as assholes have hit me on both rear fenders anyways so they need to be painted, and that would insure that I wouldnt rub.