VPT
05-29-2011, 05:27 PM
Did this today, keeps the fogs on when the high beams are turned on.
http://img857.imageshack.us/img857/4340/superdutyfoglightmod001.jpg
Pull the lever horizontally with the plug, the wire plug will lift up while you pull the lever.
http://img845.imageshack.us/img845/2568/superdutyfoglightmod002.jpg
The wire to be cut is a green with black stripe on my 03 7.3 eddie X.
http://img843.imageshack.us/img843/6241/superdutyfoglightmod003.jpg
I crimped on and then soldered on a 9mm lug.
http://img839.imageshack.us/img839/7506/superdutyfoglightmod005.jpg
I located a factory ground location on the right side of the removed lower dash panel. Bolted down the new lug with the factory single wire lug.
http://img683.imageshack.us/img683/7065/superdutyfoglightmod007.jpg
Stripped the end of the new wire after measuring and the end of the green wire coming from the harness plug. Don't forget to put the heat shrink on! Wires pushed together, twisted, soldered, heat shrunk.
http://img163.imageshack.us/img163/9405/superdutyfoglightmod013.jpg
Heat shrink the end of the green wire coming out of the wire harness and put everything back together. Works perfect on my 03.
http://img857.imageshack.us/img857/4340/superdutyfoglightmod001.jpg
Pull the lever horizontally with the plug, the wire plug will lift up while you pull the lever.
http://img845.imageshack.us/img845/2568/superdutyfoglightmod002.jpg
The wire to be cut is a green with black stripe on my 03 7.3 eddie X.
http://img843.imageshack.us/img843/6241/superdutyfoglightmod003.jpg
I crimped on and then soldered on a 9mm lug.
http://img839.imageshack.us/img839/7506/superdutyfoglightmod005.jpg
I located a factory ground location on the right side of the removed lower dash panel. Bolted down the new lug with the factory single wire lug.
http://img683.imageshack.us/img683/7065/superdutyfoglightmod007.jpg
Stripped the end of the new wire after measuring and the end of the green wire coming from the harness plug. Don't forget to put the heat shrink on! Wires pushed together, twisted, soldered, heat shrunk.
http://img163.imageshack.us/img163/9405/superdutyfoglightmod013.jpg
Heat shrink the end of the green wire coming out of the wire harness and put everything back together. Works perfect on my 03.