random Machine stuff

[VPT]

http://img692.imageshack.us/img692/5238/newscrew016.jpg

http://img38.imageshack.us/img38/6584/newscrew021.jpg

http://img51.imageshack.us/img51/9247/newscrew023.jpg

http://img18.imageshack.us/img18/6133/newscrew025.jpg

http://img220.imageshack.us/img220/3037/newscrew030.jpg

http://img18.imageshack.us/img18/1541/newscrew032.jpg

http://img175.imageshack.us/img175/3843/newscrew036.jpg

http://img14.imageshack.us/img14/3391/newscrew037.jpg

http://img94.imageshack.us/img94/2503/newscrew038.jpg

http://img24.imageshack.us/img24/332/newscrew042.jpg

http://img705.imageshack.us/img705/901/newscrew043.jpg

http://img6.imageshack.us/img6/2761/newscrew044.jpg

http://img251.imageshack.us/img251/268/newscrew046.jpg

http://img14.imageshack.us/img14/5561/newscrew048.jpg

[VPT]

http://img341.imageshack.us/img341/2883/nut015.jpg

http://img704.imageshack.us/img704/5863/nut016.jpg

http://img716.imageshack.us/img716/5400/nut019.jpg

http://img168.imageshack.us/img168/6291/nut022.jpg

http://img713.imageshack.us/img713/1788/nut027.jpg

Holding the old nut over the new nut, corner recess cut.

http://img268.imageshack.us/img268/6459/nut030.jpg

http://img693.imageshack.us/img693/7524/nut031.jpg

http://img717.imageshack.us/img717/6338/nut032.jpg

http://img532.imageshack.us/img532/3414/nut033.jpg

http://img638.imageshack.us/img638/6958/nut034.jpg

http://img6.imageshack.us/img6/4225/nut035.jpg

[VPT]

http://img251.imageshack.us/img251/7664/nut037.jpg


http://img532.imageshack.us/img532/9537/tap005.jpg

http://img32.imageshack.us/img32/1716/tap007.jpg



It is slow going but it is doing the job.

http://img532.imageshack.us/img532/4828/tap013.jpg

[SgtRauksauff]

nifty looking stuff!

Can you make the pins that go into cams that the cam gears index on?

--sareg

[VPT]

Sure can!




More stuff:

http://img186.imageshack.us/img186/788/nut2016.jpg

http://img693.imageshack.us/img693/4222/nut2018.jpg

http://img532.imageshack.us/img532/7917/nut2019.jpg


http://img87.imageshack.us/img87/7369/nut2021.jpg


http://img130.imageshack.us/img130/7387/nut2022.jpg

http://img69.imageshack.us/img69/2963/nut2024.jpg

http://img218.imageshack.us/img218/1849/nut2025.jpg

http://img690.imageshack.us/img690/7758/nut2029.jpg

http://img687.imageshack.us/img687/562/nut2031.jpg

http://img709.imageshack.us/img709/2128/nut2032.jpg

[EVILUTION]

A VPT machine
http://www.supercars.net/pitlane/pics/3302947a.jpg

[VPT]

I love ghinis!

http://img121.imageshack.us/img121/9421/toolpost007.jpg

[JamesHell]

Ok I give. What are you making there? Looks like a screw for the machine you are cutting with?
I love manual machines. I only get to push buttons and watch the program run.

[VPT]

Yes in fact it is. The screws on my 1942 lathe and 85ish grinder had a bit to much backlash for me. I ordered new precision acme threaded rods and than turned them down where needed. The machines feel like new again! I could have cut the whole screw from a solid bar stock but my leadscrew on the lathe is worn and that would show up in the new threads on the bar stock.


It is kind of neat pulling a part out, taking measurements, and reinstalling the part so you can use the machine to make its own part.

[VPT]

http://img90.imageshack.us/img90/3699/head009.jpg

http://img641.imageshack.us/img641/8559/head013.jpg

[VPT]

http://img519.imageshack.us/img519/4874/ebay007i.jpg

[SgtRauksauff]

that last one looks kinda too kinky for me.....

:)

Depending on what Web Cams says, I may contract your services. Basically, the cam gears I bought have the hole slightly larger than the pin, so that there can be a degree or three difference between the two gears. When trying to dial in cam timing, three degrees is a LOT for this engine (toyota 4AGE.) So my thought is, when getting my new cams, see if they can make pins the size I need. if not, have VPT make a pin with the correct size to fit in the cam, with a shoulder that fits into the cam gears.

--sarge

[EVILUTION]

Kinky paint job.
http://img206.imageshack.us/img206/7617/47ab29248b3d8md8.jpg

[JamesHell]

damn! forgot what I was going to say.


Oh yea what is the largest diameter you can cut with that lathe?

[EVILUTION]

More kinky
http://www.e-imagesite.com/Files2/29149458.jpg

[VPT]

10"

[VPT]

Kinky paint job.
http://img206.imageshack.us/img206/7617/47ab29248b3d8md8.jpg




Daddy will not be happy she is touching his vette!










Finally completed the quick change tool post:

http://img175.imageshack.us/img175/7198/ebay010.jpg

http://img189.imageshack.us/img189/9827/ebay015b.jpg

[VPT]

that last one looks kinda too kinky for me.....

:)

Depending on what Web Cams says, I may contract your services. Basically, the cam gears I bought have the hole slightly larger than the pin, so that there can be a degree or three difference between the two gears. When trying to dial in cam timing, three degrees is a LOT for this engine (toyota 4AGE.) So my thought is, when getting my new cams, see if they can make pins the size I need. if not, have VPT make a pin with the correct size to fit in the cam, with a shoulder that fits into the cam gears.

--sarge





Stock pin:
http://img37.imageshack.us/img37/5850/campin014.jpg

http://img822.imageshack.us/img822/3973/campin016.jpg

http://img713.imageshack.us/img713/1559/campin018.jpg

There are some new pins hiding in that bar that I need to get out.
http://img228.imageshack.us/img228/8893/campin019.jpg

Turning the new pins:
http://img64.imageshack.us/img64/1828/campin021.jpg

There is a new stepped pin:
http://img339.imageshack.us/img339/9934/campin023.jpg


You can barely see the step but it made a big difference.
http://img709.imageshack.us/img709/9452/campin028.jpg


Nice and tight now:
http://img801.imageshack.us/img801/7738/campin030.jpg

[SgtRauksauff]

w00t!!!

'hiding in that bar'.. lol! I like it!

--sarge

[VPT]

When/how/where are these cams going now to get back to you?

[VPT]

Made a plug:

http://img832.imageshack.us/img832/1394/heaterplug73002.jpg

http://img202.imageshack.us/img202/8383/heaterplug73019.jpg

http://img5.imageshack.us/img5/418/heaterplug73004.jpg

http://img806.imageshack.us/img806/5818/heaterplug73006.jpg

http://img197.imageshack.us/img197/5984/heaterplug73009.jpg

http://img59.imageshack.us/img59/4375/heaterplug73012.jpg

Yes the hex is messed up, I just eyeballed it.

http://img62.imageshack.us/img62/7049/heaterplug73016.jpg

[Extremedsm]

Where is my plug???

[SgtRauksauff]

Was that a removal of a glow-plug in a diesel? I don't recognize the spirally thing. But it also looks like it's on the cold side of the turbo.

--sarge

[VPT]

It is a intake air heater that never gets used unless you live in alaska.

Frank I can make another up if you want.

[Extremedsm]

I will take one if it was not a huge pain in the ass. Did you drive it around to see if check engine light came on?

[Dizmm]

Frank's hardware has those for probably 50 cents.

[VPT]

I will take one if it was not a huge pain in the ass. Did you drive it around to see if check engine light came on?



Drove it to rapids, around rapids, and back without issue.

[VPT]

Frank's hardware has those for probably 50 cents.



Nope, and advanced auto can order them, 5 in a box $50 for the box.

[Extremedsm]

Is it done yet???

[VPT]

Yup all done.

[Dizmm]

Nope, and advanced auto can order them, 5 in a box $50 for the box.

So $10ea? that still seems like a lot of work for $10.

[SgtRauksauff]

yeah, but he's honing his skills while doing something fun. The part itself isn't the only benefit. he gets to take cool pictures and post'em on the interwebs.

--sarge

[Posihead]

Pretty sure he said $50 not $10..........

[VPT]

So $10ea? that still seems like a lot of work for $10.



I like to build things myself, it is a sense of accomplishment and self achievement. Just going out and buying something to me says a person doesn't know anything and can only buy pride.

Plus a dollar saved is a dollar earned and all that shit.

[SgtRauksauff]

Pretty sure he said $50 not $10..........

uh...

...5 in a box $50 for the box.

So $10ea? that still seems like a lot of work for $10.

guy. Basic elementary math. Or basic reading, if you missed the "each" part.

--sarge

[Dizmm]

I like to build things myself, it is a sense of accomplishment and self achievement. Just going out and buying something to me says a person doesn't know anything and can only buy pride.

Plus a dollar saved is a dollar earned and all that shit.

work smart not harder.

You probably have more than $10 worth of wear and tear now on your machine.

[Posihead]

uh...





guy. Basic elementary math. Or basic reading, if you missed the "each" part.

--sarge

Guy, basic reading on your end would help first off... They would be $10 each if they COULD be purchased individually, which was NOT implied when he said $50 for a box. So was what VPT made a lot of work instead of spending $50, heck no. VPT, please correct me if I'm wrong, but were you implying that you'd have to buy the whole box of 5 for $50, or could you buy them individually for $10?

[Getsideways]

It would still be $10 each , cha-ching.

[Posihead]

It would still be $10 each , cha-ching.

or $50 each box. which is how they come, cha-fail.

[Dizmm]

^ "just when i thought you couldnt get any more dumber"

[Getsideways]

So its $50 for 5 in a box which divides to ..... wait arent you supposed to be climbing a pole,

[SgtRauksauff]

Basic elementary English grammar.

The conversation was started in the singular. A single plug was made.

Dizmm made a gibe at VPT, saying that such plugs could be had for fifty cents each. Still a singular subject.

VPT then quoted the price that Advance Auto gave him. A box of five plugs for fifty dollars. It was implied, not stated implicitly, that they could not be purchased individually. The price for an individual plug is easily understood from that statement of price. Still a singular subject, according to the context of the conversation.

Dizmm then wondered if the result of VPT's work was equivalent to the ten dollar price of a single plug. Still a singular subject.

You then took the statement of price out of context, either out of a lack of reading comprehension skill of the English language, or simply to be adversarial.

I then pointed out your contextual juxtaposition, hoping that it was just a misunderstanding on your part.

Apparently, my hopes are dashed, as you seem to be a complete imbecile.


--sarge

[EVILUTION]

I'm not against making your own parts.... but looking at your creation it appears its just a threaded plug. I find it very hard to believe that a plug couldn't be sourced for this application.

http://www.dieselsite.com/index.asp?PageAction=VIEWPROD&ProdID=48

[Posihead]

Basic elementary English grammar.

The conversation was started in the singular. A single plug was made.

Dizmm made a gibe at VPT, saying that such plugs could be had for fifty cents each. Still a singular subject.

VPT then quoted the price that Advance Auto gave him. A box of five plugs for fifty dollars. It was implied, not stated implicitly, that they could not be purchased individually. The price for an individual plug is easily understood from that statement of price. Still a singular subject, according to the context of the conversation.

Dizmm then wondered if the result of VPT's work was equivalent to the ten dollar price of a single plug. Still a singular subject.

You then took the statement of price out of context, either out of a lack of reading comprehension skill of the English language, or simply to be adversarial.

I then pointed out your contextual juxtaposition, hoping that it was just a misunderstanding on your part.

Apparently, my hopes are dashed, as you seem to be a complete imbecile.


--sarge

It's NOT singular, when it cannot be purchased as 1, you fucking idiot! If he could of purchased just 1, he probably would have seeing that he tried to do that instead of just making it himself in the first place. It doesn't matter what it divides to if it can't be divided upon purchase, which is the case and my point! You 3 are morons, period... WOW, what a bunch of douches, lol!

[plainrt]

posihead= focken d bag

[Dizmm]

ha, this shit keeps getting better and better.

[VPT]

LMAO!


Yes I would have had to buy the whole box for $50 and sell one to Frank for $10 so I would have been into my single plug for $40 and never need the other 3.

I had the aluminum to make the plug, the machine to make the plug, and the know how to make the plug. There is no wear on the lathe from making this one plug out of soft aluminum. All I have pretty much is my time into it which would have been wasted on the internet anyhow so the way I see it is I am $40 ahead and still have the part I needed without waiting.

Plus like sarge said I learned some stuff along the way which is priceless.

[Extremedsm]

Where is my plug damnit!!!

[EVILUTION]

Did you even click the link I posted... that was a 2 second search.

I bet fleet farm has a plug for that.
http://www.dieselsite.com/index.asp?PageAction=VIEWPROD&ProdID=48

[Posihead]

LMAO!


Yes I would have had to buy the whole box for $50 and sell one to Frank for $10 so I would have been into my single plug for $40 and never need the other 3.

I had the aluminum to make the plug, the machine to make the plug, and the know how to make the plug. There is no wear on the lathe from making this one plug out of soft aluminum. All I have pretty much is my time into it which would have been wasted on the internet anyhow so the way I see it is I am $40 ahead and still have the part I needed without waiting.

Plus like sarge said I learned some stuff along the way which is priceless.

So, exactly as I said all along, I was right and the rest of you, well, hopeless rejects comes to mind.

What have we learned from this:
Dizmm: is a douche with apparent impeccable math skills...
GSW: is as useless as they come and is a brain dead follower...
Sarge: thinks he's a teacher when in fact he's actually the most "special" of Special Ed students...
plainrt: chases rainbows in hope that one day he might find himself at the end...
VPT: Is a man with awesome skills that knows how to save a dollar or $40... lol

[98hombre]

I like money :) anyone else think VPT should give his 40$ saved to me for a new phone? lol

[Extremedsm]

Did you even click the link I posted... that was a 2 second search.

I bet fleet farm has a plug for that.
http://www.dieselsite.com/index.asp?PageAction=VIEWPROD&ProdID=48

Yes sir I did. But VPT has an aluminum chunk sitting in his cutter waiting to get finished.

[northsydryd]

lmao i love all of sarges come backs to posi,the big words make it that much better.i could watch you guys talk shit to each other all day long

[Dizmm]

LMAO!
I had the aluminum to make the plug, the machine to make the plug, and the know how to make the plug.


Plus like sarge said I learned some stuff along the way which is priceless.


...

[Dizmm]

So, exactly as I said all along,


exactly huh? you said it was costing him $50, VPT just said it cost him $40. your not good at this internet stuff are you.

[Getsideways]

Huh???
http://www.cardomain.com/ride/586847

[VPT]

...




Any time you do anything even if you have done it 1000 times before, if you pay attention you will learn something new every time.



That is hard concept for most DSM/EVO owners to grasp though so I understand your confusion. No matter how bad a dsm or evo beats you down you keep going back for more. You would make a horrible lab test rat.

[Dizmm]

Any time you do anything even if you have done it 1000 times before, if you pay attention you will learn something new every time.

or just pay close attention the first 2-3 times.

[EVILUTION]

Well.... this place has everything.... and its pretty cheap.
http://www.mcmaster.com/#plugs/=8cfnp4

[SgtRauksauff]

It's NOT singular, when it cannot be purchased as 1, you fucking idiot! ...

See, it's your lack of reading comprehension coming up again.

VPT clarified that indeed the plugs had to be purchased in bulk, for fifty dollars per box.

That does not change the fact that the entire conversation was revolving around the comparison of the price of the fabrication of ONE plug, and the price of purchasing ONE plug. Price is not the same as cost. I'll let you sort the difference between the terms on your own, as I've really lost interest in further elucidating your cretinous posting in a bombastic manner.

:this_is_stupid_yo:

--sarge

[VPT]

Well.... this place has everything.... and its pretty cheap.
http://www.mcmaster.com/#plugs/=8cfnp4




Everything but a M22 1.50mm plug.

[VPT]

or just pay close attention the first 2-3 times.




If you can learn everything in the first 2-3 times if you pay attention why aren't you racing in the big leagues yet? Why do you keep adjusting your alignment? Why do car manufactures have recalls? Why does stuff break then? All of that shit should have been figured out by now and we should be living in a trouble free world then.

[VPT]

I'm not against making your own parts.... but looking at your creation it appears its just a threaded plug. I find it very hard to believe that a plug couldn't be sourced for this application.

http://www.dieselsite.com/index.asp?PageAction=VIEWPROD&ProdID=48



I didn't have to wait or pay for shipping for my plug. I thought about it, made it, and was driving the truck to rapids car cruise within a couple hours.

[SgtRauksauff]

What do you use to put the threads on the plug? Just a regular die, or does that somehow fit in a lathe/mill/other sweet machine?

Also, was there a noticeable change in how the X drove after the change?

--sarge

[Dizmm]

If you can learn everything in the first 2-3 times if you pay attention why aren't you racing in the big leagues yet? Why do you keep adjusting your alignment? Why do car manufactures have recalls? Why does stuff break then? All of that shit should have been figured out by now and we should be living in a trouble free world then.

^ now your talking like posi.

your talking about doing the same thing 1000 times over and over again.

I'm improving my alignment and making changes, not doing the same thing. nice attempt but your examples dont work.

Why dont you get your thread back on topic and post some more pics of your random man-made crap.

[VPT]

What do you use to put the threads on the plug? Just a regular die, or does that somehow fit in a lathe/mill/other sweet machine?

Also, was there a noticeable change in how the X drove after the change?

--sarge



The threading is done with the lathe. If your interested here is a video of how it is done:

http://www.youtube.com/watch?v=0q_q53wsyHU

[VPT]

^ now your talking like posi.

your talking about doing the same thing 1000 times over and over again.

I'm improving my alignment and making changes, not doing the same thing. nice attempt but your examples dont work.




Why didn't you just set the alignment perfectly the 2nd or 3rd time? You shouldn't have to make changes if you perfect everything by the 3rd time if you pay attention.


According to this you should be able to master anything by the 3rd time if you pay attention.

or just pay close attention the first 2-3 times.

[SgtRauksauff]

That's cool! So, how do you make the threads the proper pitch? Is there a way to control the exact RPM of the lathe, and the speed that it moves across the tool?

[Dizmm]

According to this you should be able to master anything by the 3rd time if you pay attention.

just about!

I bet i could pave my own driveway now just from watching it done once.

[devlish]

According to this you should be able to master anything by the 3rd time if you pay attention. i could probalby be a surgeon by now... i've watched 3 surgeries in my life. dammit, why didn't i think of this sooner... i'd be rich by now!!!

[devlish]

Everything but a M22 1.50mm plug.

i bet Franks Hardware has something that woulda worked. Franks hardware has EVERYTHING!!

[VPT]

That's cool! So, how do you make the threads the proper pitch? Is there a way to control the exact RPM of the lathe, and the speed that it moves across the tool?



Yes, it is controlled by a feed speed, you select the appropriate gearing to get the correct TPI (threads per inch) feed. The RPM just makes it happen faster.

[VPT]

just about!

I bet i could pave my own driveway now just from watching it done once.



Your a funny guy.

[VPT]

i bet Franks Hardware has something that woulda worked. Franks hardware has EVERYTHING!!



Nope. Closest thing they had was a NPT black pipe plug with the wrong thread.

[Posihead]

exactly huh? you said it was costing him $50, VPT just said it cost him $40. your not good at this internet stuff are you.

It would cost him $50 initially and that price would have dropped to $40 if he sold one to Frank for $10. Your not good at anything are you?

Huh???
http://www.cardomain.com/ride/586847

Yes, I had a DSM, everybody makes mistakes...

Sarge, your ideology has been entertaining to say the least, but you are simply a bellwether of fail. Your constant attempts to excogitate and to be gasconading by trying to be the genius your not was completely in vain..........

[plainrt]

plainrt: chases rainbows in hope that one day he might find himself at the end...



Ok turd burgler................

[Getsideways]

Yes, I had a DSM, everybody makes mistakes...



I'm glad your mother made one or i wouldnt have a good laugh every time i read another post of yours

[Posihead]

I'm glad your mother made one or i wouldnt have a good laugh every time i read another post of yours

Every time I read one of your useless post I die a little inside upon realization that I will never get that moment of my life back...

[SgtRauksauff]

Sarge, your ideology has been entertaining to say the least, (great! That's what it's all about, mang!) but you are simply a bellwether of fail. Your constant attempts to excogitate and to be gasconading by trying to be the genius your not was completely in vain..........Well, it wasn't in vain, because I was entertained. Since that was the entire point, the goal was achieved. Oh, and that should've been the contraction "you're" instead of the posessive "your". And actually, in 7th grade when they had us take some "IQ tests", my scores were actually above the minimum standards of "genius level". I don't particularly adhere to the whole intelligence quotient idea, though.

...

[Posihead]

http://4.bp.blogspot.com/_fqgP02TDHV4/SwaFFgRdRtI/AAAAAAAAAGw/F6pxPSEMnYE/s1600/high-five.jpg

[1gnR/T]

Posi getting mad again, starts to post dumb pictures lol.

[Getsideways]

No-one wants to slap hands with you ,, might get the clap

[plainrt]

No-one wants to slap hands with you ,, might get the clap



I didnt know you could get that from sheep........................

[Posihead]

Posi getting mad again, starts to post dumb pictures lol.

like this... http://www.gwynnhome.com/Cars/Dodge%20Neon%20RT/Kim%20n%20Neon.jpg

No-one wants to slap hands with you ,, might get the clap
http://chfs.ky.gov/NR/rdonlyres/A8F72480-4E20-4B3A-8ECE-ACC50CC2C9EF/0/ArrowTop.jpg
http://www.carforums.net/images/smilies/replacefag.gif

I didnt know you could get that from sheep........................

That's not even funny, I guess part of being a Neon r/t owner is failing at life.

[plainrt]

Damn that thing is nice but i would rather have a sweet exotic like a berreta instead though...............You sure that isnt your girl though?She has a sweet k&n filter sticker like you do on your pos.......


Posi in action
http://i5.photobucket.com/albums/y175/plainrt/sheep_on_bike.gif

[Getsideways]

Posi you are now advertising to take it up the ass for qaurters,, ha at least you came out of the closet finally

[VPT]

http://www.chimpout.com/forum/imagehosting/5864a97980a763e8.jpg

[Getsideways]

Dood thats just wrong

[VPT]

I know, not one albino in sight!

[Getsideways]

I didnt know you had picture evidence of brent being made ughh

[VPT]

Two blacks make a white?

[Draven8795]

Nope. Closest thing they had was a NPT black pipe plug with the wrong thread.


Thats wierd. Did they pull out any of their books for ya? I had to order a castle nut for the honda and couldn't find it anywhere. They had to order a whole box so I could get one but all I had to pay for was one.

[Getsideways]

Two blacks make a white?

Thats where the mailmain comes into play i guess

[Posihead]

Posi you are now advertising to take it up the ass for qaurters,, ha at least you came out of the closet finally

YOU posted it hence YOU take it up the ass for quarters... I didn't think it was possible for you to get dumber, but you prove me wrong time and time again... Thanks for the laughs though, there is nothing funny on TV tonight anyway! You're WAY outta the closet, why is your BF/BFF taking so long?

Damn that thing is junk, i want a sweet berretta instead though............... Looks like my kind of girl! She has a sweet k&n filter sticker like you do.......

Yeah, what you said! The K&N sticker was on the car when I bought it, it's gone now.

I didnt know you had picture evidence of brent being made ughh

HaHa Brent! aka (1gnR/T)

[VPT]

Thats wierd. Did they pull out any of their books for ya? I had to order a castle nut for the honda and couldn't find it anywhere. They had to order a whole box so I could get one but all I had to pay for was one.




No, I only had them do that a couple times before and I didn't want to wait for ordered parts. Wasn't worth any more effort and gas driving around when I had the means to make my own.

[Getsideways]

YOU posted it hence YOU take it up the ass for quarters... I didn't think it was possible for you to get dumber, but you prove me wrong time and time again... Thanks for the laughs though, there is nothing funny on TV tonight anyway! You're WAY outta the closet, why is your BF/BFF taking so long?



Yeah, what you said! The K&N sticker was on the car when I bought it, it's gone now.



HaHa Brent! aka (1gnR/T)

Your the one who posted the sign fatty(which clearly stated whoever posted it was taking it up the ass for qaurters pretty obvious what you were advertising) , and no i ment brett sorry i always forget your name its just so meaningless to me.

[Posihead]

Your the one who posted the sign fatty(which clearly stated whoever posted it was taking it up the ass for qaurters pretty obvious what you were advertising) , and no i ment brett sorry i always forget your name its just so meaningless to me.

Nope, you posted the comment in which the image was referring too Nancy. I guess you missed the arrow pointing to your post, and if quoting it and replying wasn't enough... Keep failing son!

[Getsideways]

Once again you suck so bad you had to edit your crap

[Posihead]

Once again you suck so bad you had to edit your crap

No, you just don't understand what replying to a quote means, so I figured I'd help you out.

[Getsideways]

^You're english skills need work as well.

[Posihead]

^You're english skills need work as well.

I forgot a word, oops, thanks Nancy! Oh BTW, English should be capitalized champ! BWAHAHAHAHAHAHAHAHAHAHAHAHAAAAAAAAAA, Oh man, you're too easy!

[matt]

^You're english skills need work as well.

I forgot a word, oops, thanks Nancy! Oh BTW, English should be capitalized champ! BWAHAHAHAHAHAHAHAHAHAHAHAHAAAAAAAAAA, Oh man, you're too easy!

In his sentence, the only thing that you noticed was incorrect was that he didn't capitalize "English?"

Really? YOU'RE the one correcting people around here?

[Getsideways]

^I made it very easy for him and he didnt catch it. Thanks Matt for bursting my bubble.

[Posihead]

In his sentence, the only thing that you noticed was incorrect was that he didn't capitalize "English?"

Really? YOU'RE the one correcting people around here?

Sorry, I'm not the spelling police. I don't waste my time over analyzing like you. So he made 2 major spelling and grammar errors and I forgot a word. It's obvious here that GSW is the imbecile!

[VPT]

This is getting weak, you guys need to come up with some better rips then spelling and pictures.

[Posihead]

VPT, how about a song with pictures?

You got your sunrise
You caught a prize
Micaiuhh, his Mate and his Johnson
http://i207.photobucket.com/albums/bb295/posihead/Brett%20and%20Ashlie/17269_1179537415958_1453832738_30395382_5794341_n. jpg
Saturday nights
Dance club lights
Micaiuhh, his Mate and his Johnson...
http://i207.photobucket.com/albums/bb295/posihead/Brett%20and%20Ashlie/n1453832738_30020600_3167.jpg

[Draven8795]

No, I only had them do that a couple times before and I didn't want to wait for ordered parts. Wasn't worth any more effort and gas driving around when I had the means to make my own.

True. I always hate looking for obscure parts always having to drive a few different places and never finding the right part.

[Dizmm]

is there one person that likes posihead here? would anyone object to a BAN? every thread i see posihead post in leads to another posihead bashing thread.

[Posihead]

is there one person that likes posihead here? would anyone object to a BAN? every thread i see posihead post in leads to another posihead bashing thread.

That is because of people like YOU that make dumb ass comments! Maybe if you and your butt buddies would just STFU for once and keep a thread on topic, then it wouldn't happen! Ban yourself if your going to ban anyone or learn how to properly run a forum!

BTW, YOU specifically created a bashing thread against me, so your the problem...

[Dizmm]

That is because of people like YOU that make dumb ass comments! Maybe if you and your butt buddies would just STFU for once and keep a thread on topic, then it wouldn't happen! Ban yourself if your going to ban anyone or learn how to properly run a forum!

BTW, YOU specifically created a bashing thread against me, so your the problem...

i did create a special thread just for you, but it just doesn’t contain all of the posihead bashing anymore. you've outgrown this forum posidouche, take it to the next level and go someplace else.

[Posihead]

i did create a special thread just for you, but it just doesn’t contain all of the posihead bashing anymore. you've outgrown this forum posidouche, take it to the next level and go someplace else.

YOU need to leave, you are the problem with this forum. If you have an issue with me say it to my face please.

[Dizmm]

YOU need to leave, you are the problem with this forum. If you have an issue with me say it to my face please.

ha, i dont want to get near your face, you tend to spit all over the place when you talk. plus you never come to any events, your always hiding in your basement on your computer.

[plainrt]

ha, i dont want to get near your face, you tend to spit all over the place when you talk. plus you never come to any events, your always hiding in your basement on your computer.



Lol pussyhead will never show up to a event..................End of story ban the little bitch

[Posihead]

ha, i dont want to get near your face, you tend to spit all over the place when you talk. plus you never come to any events, your always hiding in your basement on your computer.

No, actually, I don't spit when I talk, but your breath smells like an outhouse, from eating ass I presume, and that is a fact! I'm not hiding from anyone as I've been to many things this year, except a racing event. I don't have a basement, but whatever you say champ!

[Posihead]

Lol pussyhead will never show up to a event..................End of story ban the little bitch

plainrat, did I give you permission to speak?

[mrslysly]

VPT, you think you could plumb in cutouts in the exhaust on the vette? Without it costing me an arm and a leg and my soul?

[Getsideways]

You do spit when you talk hahaha , every time your half drunk self would come up and shake hands with me at steel i felt the urgent need to back away as you stand way to close and i dont like slobber showers.
I did however like how you always act like your my buddy in front of others.

[plainrt]

plainrat, did I give you permission to speak?


Im not your boyfriend so dont talk to me like that.


I don't have a basement!


cause you live in a focken trailer park?

[VPT]

VPT, you think you could plumb in cutouts in the exhaust on the vette? Without it costing me an arm and a leg and my soul?



Yes I could for possibly a reduced price of just an arm and leg. Are they electric, cable, or wing nutted?

[Posihead]

You do spit when you talk hahaha , every time your half drunk self would come up and shake hands with me at steel i felt the urgent need to back away as you stand way to close and i dont like slobber showers.
I did however like how you always act like your my buddy in front of others.

I haven't been drunk or half drunk since March of 2009, and I only go to stupid Steel when girls ask me too. I only shake your hand because I feel sorry for you. And no, I don't spit when I talk, but your breath smells just like dizmms...

[Posihead]

Im not your boyfriend so dont talk to me like that.





cause you live in a focken trailer park?

I'm sorry, that's your boyfriends job, not mine, my bad. I live in a nice little house in a great neighborhood by Midstate Tech in Rapids.

[matt]

is there one person that likes posihead here? would anyone object to a BAN? every thread i see posihead post in leads to another posihead bashing thread.

Keep him here. I like watching him make a fool out of himself over and over and over... It brightens my day.

[VPT]

Can we ban Tom instead? that guy never contributes anything to this forum. Actually he takes away from this forum with all his deletions.

[Posihead]

Can we ban Tom instead? that guy never contributes anything to this forum. Actually he takes away from this forum with all his deletions.

You can post porn but no N words on this public forum! Geeze VPT, follow the rules!

[VPT]

Shit stains.

[matt]

POShead

[Posihead]

whatever mutt

[TomKat]

Can we ban Tom instead? that guy never contributes anything to this forum. .

Maybe you should do another poll VPT.

[Posihead]

Maybe you should do another poll VPT.

Polls are useless when little bitch-ass prima-donna Admins are at the helm fucking with them! Impeach dizmm!

[VPT]

Polls are useless when little bitch-ass prima-donna Admins are at the helm fucking with them! Impeach dizmm!



And TK, this forum should be ran by Evil only!

[Dizmm]

yeah, Evil. do your dam job!

[98hombre]

Evil for president!

[TomKat]

Evil for president!

No no. Evil for sheriff.

[devlish]

No no. Evil for sheriff.

you had to bring that up didn't you TK??

http://i303.photobucket.com/albums/nn157/devlish/cwscc%20stuff/JJForSheriffSign.jpg

i'm sure some of you will remember this one!

[EVILUTION]

I had lots of people stop and talk to me about that sign!

[devlish]

hahaha,nice! weren't you on vaca the entire week i put it up right?

[Extremedsm]

Thanks again VPT for getting the broken shit out of my caliper mounting bracket. Appriciate it!!!

[EVILUTION]

Luckiest guy on the planet
http://s3.motherless.com/dev32/0/440/418/0440418643.jpg

[VPT]

Thanks again VPT for getting the broken shit out of my caliper mounting bracket. Appriciate it!!!



No problem, thanks for the ribs and beer!

[mpf_supra]

Luckiest guy on the planet
http://s3.motherless.com/dev32/0/440/418/0440418643.jpg

wow i'd bang the second one to the left..and her friend that's drunk and all over her..

[northsydryd]

ha^ i start from the left and get that quik one out of the way then make my way to the right

[98hombre]

ha^ i start from the left and get that quik one out of the way then make my way to the right
true! But either way this pic makes them look like team players! so either way endless possibilities lol

[devlish]

i'd take them all except the far left, but if i had to go through her to get to the other 4... i would.

[Dizmm]

i'd take them all except the far left,

ha......

[stpdk]

Luckiest guy on the planet
http://s3.motherless.com/dev32/0/440/418/0440418643.jpg
pretty sure 2nd to left's breast are covered by a sweat band haha

[VPT]

Tiny titties.

[VPT]

http://img263.imageshack.us/img263/9886/toolholders004.jpg

[SgtRauksauff]

are those tool/blade mounts? for makin' different shaped cuts in whatever's spinning?

[SgtRauksauff]

I might have an interesting project coming up soon, involving a lathe... How do you feel about turning down axle flanges so they fit inside a smaller rotor hat, turning the face a bit, and cutting the back side flat so the stud heads have a place to sit?

Basically, taking a toyota axle (6x5.5) and make it work as a 5x4.25.
within less than a quarter inch of the Volvo wheel mounting surface axle width, so just have to re-weld the suspension pickup points. cool part is, the supra diff fits right in with the right parts, so a good cheap (4-spider-gear) LSD with good ratio is not too hard to make. and it won't break, ever, with the power I'll be throwing at it.

Is your lathe long enough to fit an axle?

[VPT]

Normally axle splines and anything within a couple inches of the splines is hardened. I may be able to turn it with carbide bits depending on the hardness. Most of the time anything hardened has to be ground or annealed.

I should be able to get it in my lathe, the area to be turned harness is the deciding factor.

[SgtRauksauff]

not the splined end, the flange end. the axles start with a 5.5" bolt circle, I'll be turning the flanges down for a 4.25" bolt circle, and making them fit under the volvo rotor hats.

The entire reason for using this particular axle is that its wheel mounting surface to wheel mounting surface is the same as what the Volvo already has. So, no narrowing needs to be done, juts re-drilling the axles so the bolt circle works, and making them fit under the rotors. Then, just some easy pickup points welded back onto the axle housing, and it's still a stock stock stock axle, as well as a strong strong strong axle. With LSD's and ratios to choose from for the price of peanuts...

a picture of a toyota axle that's ready to be drilled. The original holes were welded shut, then a deeper center spigot welded on, then the face smoothed, and the spigot turned to size. On the back side, that can't be seen, the area where the stud shoulders go was turned flat also. You can see on the edges where the scallops are, where the original bolt circle used to be:
http://i475.photobucket.com/albums/rr116/janvanv/Toyota8inchmadeintoVolvo1.jpg

--sarge

[VPT]

I just might be able to do something for you. Coming up to a TT or anything?

[SgtRauksauff]

probably not this week, I'm frickin' swamped.
We're moving one of the newspapers into new offices, I get to assemble/disassemble cubicles (how is it that the IT guy somehow magically becomes the building services guy too?), and tomorrow I've got to tone out all of the phone/network drops, install a switch and patch cables, and install a phone system. This toyota axle is probably going to be a few months down the road, nothing immediate.

--sarge

[VPT]

Okie dokie.

[VPT]

http://img542.imageshack.us/img542/1936/excursionfpr001.jpg

http://img843.imageshack.us/img843/7546/excursionfpr003.jpg

http://img839.imageshack.us/img839/8991/excursionfpr010.jpg

http://img3.imageshack.us/img3/4189/excursionfpr011.jpg

http://img41.imageshack.us/img41/9648/excursionfpr015.jpg

http://img4.imageshack.us/img4/8725/excursionfpr016.jpg

http://img163.imageshack.us/img163/6915/excursionfpr020.jpg

http://img26.imageshack.us/img26/7883/excursionfpr025.jpg

[VPT]

Turned some brass stock down to the OD of the jet body.

http://img198.imageshack.us/img198/1905/dieseljets003.jpg

Turned the smaller end of the body, did the inner taper and working on the outer taper here.
http://img163.imageshack.us/img163/7316/dieseljets007.jpg

Moved on to the finer lathe to do the drilling.
http://img6.imageshack.us/img6/4887/dieseljets008.jpg

The jet looks relatively big again.
http://img838.imageshack.us/img838/7013/dieseljets009.jpg

Which drill bit do we need?
http://img856.imageshack.us/img856/6412/dieseljets012.jpg

.0135 looks good to me.
http://img855.imageshack.us/img855/545/dieseljets016.jpg

Ready to go.
http://img683.imageshack.us/img683/1264/dieseljets019.jpg

Jets all done, can you see the hole?
http://img508.imageshack.us/img508/6807/dieseljets021.jpg

[05Saab]

Damn!

[SgtRauksauff]

That is so freakin' neat. Do you ever need to dress the edges of the chucks that hold a .0135 drill?

[Dizmm]

I know this may sound stupid, but you can get a set of 8 jets for $25. how much time did you spend to save $3.15

[VPT]

That is so freakin' neat. Do you ever need to dress the edges of the chucks that hold a .0135 drill?



Nope, drill jaws should never wear so long as you don't spin a drill bit in them.

[VPT]

I know this may sound stupid, but you can get a set of 8 jets for $25. how much time did you spend to save $3.15

Can you find .0135" jets? I don't think so being I have made more then a few of them before for people.

[Dizmm]

http://www.ebay.com/itm/8-NITROUS-FLARE-JET-ANY-SIZE-FITS-NOS-CFN-/350152208560?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5186b2b0b0

.013. I bet your drill bit doesn’t have a tolerance of .0005.

[SgtRauksauff]

I just looked that up because I was curiou.s

It seems that drill diameters have a plus zero tolerance (they are not bigger) and up to a minus .0005 tolerance.

so the .013 drill could make between a .0125 and .0130 hole, but will not make a .0135 hole as needed.

[Dizmm]

I just looked that up because I was curiou.s

It seems that drill diameters have a plus zero tolerance (they are not bigger) and up to a minus .0005 tolerance.

so the .013 drill could make between a .0125 and .0130 hole, but will not make a .0135 hole as needed.

then go with a .014, which could be .0135 - .014.

[VPT]

http://www.ebay.com/itm/8-NITROUS-FLARE-JET-ANY-SIZE-FITS-NOS-CFN-/350152208560?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5186b2b0b0

.013. I bet your drill bit doesn’t have a tolerance of .0005.



Quantity:
More than 10 available
Price: US $27.95
Buy It NowBuy It Now

Add to Wish List

Add to Watch list

Shipping: $13.50 Expedited Shipping



$41.45 shipped! What a deal!

[VPT]

Plus I can guaranty my small drill bits are perfect tolerance.

[VPT]

http://img267.imageshack.us/img267/7156/greasefitting015.jpg

http://img821.imageshack.us/img821/3425/greasefitting018.jpg

[SgtRauksauff]

grease fittings for what?

[snoxracer183]

you know you can buy those for like $0.40/ea....

[VPT]

you know you can buy those for like $0.40/ea....

The zerks themselves are $0.75 each.

[VPT]

grease fittings for what?

For greasing ford super duty front "unserviceable" wheel bearings.

[EVILUTION]

Impressive!

[SgtRauksauff]

ah, cool! I was kind of thinking maybe for a pilot-bushing remover. I've heard tell of people just packing that area with grease, then putting a rod the same diameter of the input shaft through, then tapping it in -- the grease gets displaced and pushes the bushing out. Kinda handy if you don't have a good way to pull the bushing.


so, where do these pieces go into the hub assembly? take pictures of the install!

[VPT]

ah, cool! I was kind of thinking maybe for a pilot-bushing remover. I've heard tell of people just packing that area with grease, then putting a rod the same diameter of the input shaft through, then tapping it in -- the grease gets displaced and pushes the bushing out. Kinda handy if you don't have a good way to pull the bushing.


Thats a good way to get broken roll pins out of blind holes too. If grease is to fluid candle wax also works great!