things

[smuT]

can you weld me something?...maybe tomorrow?

[VPT]

Maybe, pm me or give me a call at 341-0347

[VPT]

Hows that all working out for you guy?

[TSi_II]

Wanna weld me up one of them super-high flowing MOOOOOGEN intakes? Haha actually I do have some Honda suspension questions for you but I'll shoot you a PM for those.

[smuT]

i need to fix my piping...shit keeps blowing up

[Pointdsm]

bead the ends of the pipe, that'll keep your couplers on.

[VPT]

bead the ends of the pipe, that'll keep your couplers on.


I know someone that can do that.

[devlish]

Hey VPT... you still have that funky weld grinding tool you told me about to make my pipes look all pretty?? we should give that a try sometime maybe... don't you think?

[Dizmm, (Old Account)]

yeah, I need some I/C piping!!!

[VPT]

Hey VPT... you still have that funky weld grinding tool you told me about to make my pipes look all pretty?? we should give that a try sometime maybe... don't you think?


The pads are made for stainless piping.

[VPT]

yeah, I need some I/C piping!!!


smuts the one that needs ic piping, he has more piping than the titanic in his car.

[devlish]

The pads are made for stainless piping. won't work on mild or what?? bummer.

i guess i'll have to consider new aluminum stuff then if i want it to look better huh?

[VPT]

The pads are made for stainless piping. won't work on mild or what?? bummer.

i guess i'll have to consider new aluminum stuff then if i want it to look better huh?

I have some pads for mild but it won't be as nice as stainless. Aluminum would be nice yes, but titanium looks real nice after its all welded. If you want no welds showing at all and just nice clean strait pipe stainless with the pad treatment is the way to go.

[Dizmm, (Old Account)]

yeah, I need some I/C piping!!!


smuts the one that needs ic piping, he has more piping than the titanic in his car.

i dont want my pipes to pop off. but seriously, I need some piping, I will have to get you some specs, or just get you the old pipe and have to re-make the pipe with nice mandrel bends as the guy that had the car before me used all exhaust piping and press bent.

[VPT]

yeah, I need some I/C piping!!!


smuts the one that needs ic piping, he has more piping than the titanic in his car.

i dont want my pipes to pop off. but seriously, I need some piping, I will have to get you some specs, or just get you the old pipe and have to re-make the pipe with nice mandrel bends as the guy that had the car before me used all exhaust piping and press bent.


Awesome!

I'll be here when your ready.

[Dizmm, (Old Account)]

yeah, I need some I/C piping!!!


smuts the one that needs ic piping, he has more piping than the titanic in his car.

i dont want my pipes to pop off. but seriously, I need some piping, I will have to get you some specs, or just get you the old pipe and have to re-make the pipe with nice mandrel bends as the guy that had the car before me used all exhaust piping and press bent.


Awesome!

I'll be here when your ready.

be here? where is here??? PM me ur #

[VPT]

Maybe, pm me or give me a call at 341-0347

[Dizmm, (Old Account)]

Maybe, pm me or give me a call at 341-0347

I thought i saw ur # posted before but did not feel like looking through them all to find it,

[VPT]

You just had to click the page one button on this thread.

[Dizmm, (Old Account)]

You just had to click the page one button on this thread.

If I knew what post it was, I could have done that. But was was not sure and would have had to look.

[Pointdsm]

VPT your getting a phone call this friday, along with my FMIC and piping friday night, does that sound good?(i'm in a rush with only a week, so i need to start right away).

[Dizmm, (Old Account)]

VPT your getting a phone call this friday, along with my FMIC and piping friday night, does that sound good?(i'm in a rush with only a week, so i need to start right away).

PDSM, you need I/C piping too???

VPT, can you just re-create this 3-inch I/C piping and make me a 2.5inch.

http://www.dsmsupport.com/images/orange/piping.jpg

[Pointdsm]

I've wanted FMIC piping before all of you, just that i'm not in point to actually get it done. DIZZM, my setup will actually look alot like your 3" setup, if i had a bigger turbo I would love to do a trade, but 3" is way to big.

[Dizmm, (Old Account)]

I've wanted FMIC piping before all of you, just that i'm not in point to actually get it done. DIZZM, my setup will actually look alot like your 3" setup, if i had a bigger turbo I would love to do a trade, but 3" is way to big.

Well if you want, maybe VPT can do 2 sets of I/C piping at the same time. I want to run 2.5 inch I/C piping, short route and for a FMIC. is that the same for you? Short router piping is really close to the same for a 1g and 2g.

[Pointdsm]

Yup, we're the same, only difference is that he is welding a quick 90 on my endtank so that side faces backwards. I'm having the hotside still go around the long way for now, i already have that piece. My FMIC exits side to side, so i need a quick bend on the cold side to fit into the holes next to the radiator.

[VPT]

VPT your getting a phone call this friday, along with my FMIC and piping friday night, does that sound good?(i'm in a rush with only a week, so i need to start right away).


That will be fine, shoot me a pm thursday night and remind me.

[VPT]

VPT your getting a phone call this friday, along with my FMIC and piping friday night, does that sound good?(i'm in a rush with only a week, so i need to start right away).

PDSM, you need I/C piping too???

VPT, can you just re-create this 3-inch I/C piping and make me a 2.5inch.

http://www.dsmsupport.com/images/orange/piping.jpg


Sure can, is it possible to have the car over here? Sometimes it makes it easier for bend alignment and acc. placement.

[Pointdsm]

http://i75.photobucket.com/albums/i282/PointDSM/IMG_0214.jpg
That is my setup, you can see on the cold side exit, the hole directly behind it where my pipe needs to be.

[Dizmm, (Old Account)]

cant bring the car over as its apart right now. can i give you the pipes i got an just replicate them in 2.5inches.

[VPT]

cant bring the car over as its apart right now. can i give you the pipes i got an just replicate them in 2.5inches.


Sure.

[Extremedsm]

Hey Dizmm. Are you following in Jeffro's foot steps and putting your car back to stock. You must only be going a half inch at a time though. :lol:

[smuT]

where the hell were you today?

[Dizmm, (Old Account)]

Hey Dizmm. Are you following in Jeffro's foot steps and putting your car back to stock. You must only be going a half inch at a time though. :lol:

putting my car back to stock??? shya right. car is already stock.

[EVILUTION]

Darth isn't completely stock but it sure is more peaceful to twirl around in without the 5" flame throwing exhaust.

[VPT]

where the hell were you today?


I had to work, I was gone all day. Shoot me a pm or call me. Whens the next good day for you again?

[Dizmm, (Old Account)]

Darth isn't completely stock but it sure is more peaceful to twirl around in without the 5" flame throwing exhaust.

I can understand how stock can be nice. things just work all the time, more comfortable, more practical, but thats just not fun.

[EVILUTION]

Come to BHFs and see if comfortable and practical pays off or not.

[devlish]

i like my stock car. it's comfy & practical. finally i don't have to open/close the door for bradley crawling in/out of the backseat!! i love it.

as for BHF, maybe at a later date i'll bring the Omni and enter in a novice class just for fun. i would love to do it, but time & money are still hard to come by for some people.

[VPT]

Dizmmsz guy, call me. You shits almost ready to go, but you said you have some things, and I need to know some things.

[devlish]

you're almost done with his pipes already? holy balls! not that i should care, but i saw those pipes still in his garage just a few days ago i thought. maybe not though huh? hmm... i'm going to think up some shit for you to weld together for me. Oh, BTW, VPT i have some stuff for you too. drove by the other night but it looked quiet.

[Pointdsm]

I'll give ya a call around 1:00 tomorrow.

[Dizmm, (Old Account)]

I/C pipes are complete and look really sweet. THANKS again VTP

[VPT]

Glad your happy with it.

[Dizmm, (Old Account)]

i even had to teach TVP that you can use quarters to weld in some gaps.

[devlish]

there shouldn't be any gaps in the first place... what kind of pipes are you selling him VPT?? ones with quater sized holes in them??

[Dizmm, (Old Account)]

there shouldn't be any gaps in the first place... what kind of pipes are you selling him VPT?? ones with quater sized holes in them??

no, we thought it would be funny to weld a quarter on my pipes.

[TomKat]

Well now they are worth at least $0.25.

[Dizmm, (Old Account)]

Well now they are worth at least $0.25.

thats what i thought. anyways, the silver dizmm will be out and about tonight. there will be a free showing of the I/C pipes with a quarter on it.

[EVILUTION]

I should be out and about earlier like 9pm.

[devlish]

OK, i'll shoot for 9pm, so evil doesn't feel all alone.

[Dizmm, (Old Account)]

Well, if u guys shoot for 9, we'll expect you at 10 then.

[TomKat]

That's not how Evil rolls. If he says 9pm then he means 8:45pm.

[devlish]

That's not how Evil rolls. I he says 9pm then he means 8:45pm.HUH?? old age is kickin your' ass TK!

yeah, evil is always way ahead of schedule, and i don't pay attention anymore and just show up when i feel like it.

[TomKat]

Typo - sorry. If he says....

So Evil will show up at 8:45pm and he almost always has ants in the pants so he'll be needing to move on by 9:01pm.

[devlish]

well those are 16 minutes of his life wasted somehow.